- Power Supply: 12 V ± 10% (DC)
- Bias-Current: 40mA (DC)
- Max Current: 440mA (DC)
- Temperature range: -20C to + 70C
- Sheet metal thickness from 1.5-2mm (plus powder coating)
- Top mounting screws Tq to 1.0-1.2Nm
- Bottom cap screws Tq to 0.4Nm
The swinghandle can be connected to a single or 3-point cam. This allows for the use of round rods with this system to create multi-point locking.
The swinghandle drives the gear in the rod latch housing. Flat rods run perpendicular to the door frame where rollers secure behind the frame mounted catch.
The swinghandle drives the gear operating the side-mounted bar system, this is typically used to keep the locking rods outside of the door frame and seal.
Installation for MLR5000KP for Rod Latch
Installation of MLR5000KP for Cam Latch
Range Introduction of MLR
MLR5000 KP (125 kHz) for Offset
MLR5000 KP (125 kHz) for Rod Latch
MLR5000 KP (125 kHz) for Cam Latch
MLR5000 KP (13.36 MHz) for Offset
MLR5000 KP (13.56 MHz) for Rod Latch
MLR5000 KP (13.56 MHz) for Cam Latch