Product Features
Products
MLR5000 KP
  • With keypad (two-factor authentication)
  • No key override
  • 125 kHz or 13.56 MHz
  • TCP/IP Ethernet
  • Temperature status
  • PoE (Power over Ethernet) capable
MLR5000
  • With backlit label holder
  • No key override
  • 125 kHz or 13.56 MHz
  • TCP/IP Ethernet
  • Temperature status
  • PoE (Power over Ethernet) capable
MLR4000 KP
  • With keypad (two-factor authentication)
  • No key override
  • Multi-frequency antenna (125kHz and 13.56 MHz)
  • RS485
  • Optional end-of-row
MLR4000
  • With backlit label holder
  • No key override
  • Multi-frequency antenna (125kHz and 13.56 MHz)
  • RS485
  • Optional end-of-row
MLR3000 KP
  • With backlit label holder
  • No key override
  • 125 kHz or 13.56 MHz
  • RS485
  • Temperature status
MLR3000
  • With backlit label holder
  • No key override
  • 125 kHz or 13.56 MHz
  • RS485
  • Temperature status
MLR2500 KP
  • With keypad (two-factor authentication)
  • No key override
  • Multi-frequency antenna (125kHz and 13.56 MHz)
  • Wiegand interface
  • Optional end-of-row
MLR2500
  • With backlit label holder
  • No key override
  • Multi-frequency antenna (125kHz and 13.56 MHz)
  • Wiegand interface
  • Optional end-of-row
MLR1000
  • With backlit label holder
  • No key override
  • Interface via closing contact / direct power supply

Dimension

Technical Details

  • LED for handle status
  • LED for temperature status
  • Sabotage alarm LED
  • Keypad for two-factor authentication
  • Integrated relay control
  • 125 kHz Reader
  • 13.56 MHz Reader
  • Form C relay output
  • Door contact input
  • RS485
  • Storage capacity for 2,000 cards and pins per transponder
  • Storage capacity for 500 events and 30 time profiles
  • Integrated real-time clock with buffering for up to 60 minutes at 25 ° C
  • Stand-alone possible
  • Temperature range -20 ° C to +70 ° C
  • 1.5-2mm sheet thickness plus powder coating
  • Top mounting screws Tq to 1.0 – 1.2Nm
  • Bottom cap screws Tq to 0.4 Nm
  • 12V power supply ± 10% (DC)
  • 40mA standby current (DC)
  • 440mA maximum current (DC)

Connection

LED Status

Mechanical Installation

CAM LATCH

The swinghandle can be connected to a single or 3-point cam. This allows for the use of round rods with this system to create multi-point locking.

ROD LATCH

The swinghandle drives the gear in the rod latch housing. Flat rods run perpendicular to the door frame where rollers secure behind the frame mounted catch.

OFFSET

The swinghandle drives the gear operating the side-mounted bar system, this is typically used to keep the locking rods outside of the door frame and seal.

Item number

MLR3000 KP (125 kHz) for Offset
610-9307.00-00000
MLR3000 KP (125 kHz) for Rod Latch
610-9301.00-00000
MLR3000 KP (125 kHz) for Cam Latch
610-9339.00-00000
MLR3000 KP (13.56 MHz) for Offset
610-9307.00-00001
MLR3000 KP (13.56 MHz) for Rod Latch
610-9301.00-00001
MLR3000 KP (13.56 MHz) for Cam Latch
610-9339.00-00001

Delivery

Swinghandle
Housing/Mold plastic PA6, black; handle zinc die, matte chrome plated
Reader unit
Plastic housing, fixable with screws or self-adhesive pad
Connection cable
8-pole, 350 cm, UL-stranded AWG 26, on one side with molded RJ45 plug, on one side with crimped JST-ZH-connector ZHR-8
Particularities
An external power supply is not included, but can be ordered as an accessory.