Product Features
Products
  • Label holder with customizable backlit LED
  • Keypad for two-factor authentication
  • LED for handle and temperature status
  • No key override
  • TCP/IP Ethernet
  • 125kHz HID Prox
  • 13.56MHz HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2
  • Storage capacity for 2,000 cards and pins
  • Storage capacity for 500 events (offline) and 30 time profiles
  • PoE IEEE 802.3af (Power over Ethernet) capable
  • Label holder with customizable backlit LED
  • Keypad for two-factor authentication
  • LED for handle and temperature status
  • No key override
  • RS485
  • 125kHz HID Prox
  • 13.56MHz HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2
  • Storage capacity for 2,000 cards and pins
  • Storage capacity for 500 events (offline) and 30 time profiles
  • Label holder with customizable backlit LED
  • Keypad for two-factor authentication
  • LED for handle status
  • No key override
  • Wiegand interface
  • Multi-frequency antenna (125kHz and 13.56MHz) HID Prox, HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2, PIV LEAF
MLR1000
  • Integration into existing management systems
  • Label holder with customizable backlit LED
  • LED for handle status
  • No key override
  • Interface via closing contact / direct power supply

Dimension

Technical Details

  • Power Supply: 12 V ± 10% (DC)
  • Bias-Current: 40mA (DC)
  • Max Current: 440mA (DC)
  • Temperature range: -20C to + 70C
  • Sheet metal thickness from 1.5-2mm (plus powder coating)
  • Top mounting screws Tq to 1.0-1.2Nm
  • Bottom cap screws Tq to 0.4Nm

Connection

LED Status

Mechanical Installation

CAM LATCH

The swinghandle can be connected to a single or 3-point cam. This allows for the use of round rods with this system to create multi-point locking.

ROD LATCH

The swinghandle drives the gear in the rod latch housing. Flat rods run perpendicular to the door frame where rollers secure behind the frame mounted catch.

OFFSET

The swinghandle drives the gear operating the side-mounted bar system, this is typically used to keep the locking rods outside of the door frame and seal.

Installation MLR5000 for Rod Latch

Installation MLR5000 for Cam Latch

Range Introduction MLR

Item number

MLR5000 (125 kHz) for Offset
610-9607.00-00000
MLR5000 (125 kHz) for Rod Latch
610-9601.00-00000
MLR5000 (125 kHz) for Cam Latch
610-9639.00-00000
MLR5000 (125 kHz) for Rod Latch (Rittal)
610-9645.00-00000
MLR5000 (13.56 MHz) for Offset
610-9607.00-11356
MLR5000 (13.56 MHz) for Rod Latch
610-9601.00-11356
MLR5000 (13.56 MHz) for Cam Latch
610-9639.00-11356
MLR5000 (13.56 MHz) for Rod Latch (Rittal)
610-9645.00-11356

Delivery

Swinghandle
PDF Download MLR5000