Product Features
Products

Dimension

Technical Details

  • Power Supply: 5V +10% / 12V ± 10% (DC)
  • Bias-Current: 180mA / 60mA (DC)
  • Max Current: 400mA / 130mA (DC)
  • Data Pulse Interval: 50µs
  • Data Signal Delay: 2ms
  • Sheet metal thickness from 1.5-2mm (plus powder coating)
  • Top mounting screws Tq to 1.0-1.2Nm
  • Bottom cap screws Tq to 0.4Nm

Connection

LED Status

Mechanical Installation

CAM LATCH

The swinghandle can be connected to a single or 3-point cam. This allows for the use of round rods with this system to create multi-point locking.

ROD LATCH

The swinghandle drives the gear in the rod latch housing. Flat rods run perpendicular to the door frame where rollers secure behind the frame mounted catch.

OFFSET

The swinghandle drives the gear operating the side-mounted bar system, this is typically used to keep the locking rods outside of the door frame and seal.